King Tools

01933 410900

In Store Opening Hours

sales@kingtools.co.uk

Monday to Friday: 8:00am - 5:30pm

   

Saturday: 8:45am - 12:00pm
Items: 0
Total: £0.00
Min. Carriage: £0.00
Basket Total: £0.00
Shop By Brand
 
 
 
 
 
 
 .
Breakers, drills , saws & more

 

 

 
 
147 items are stocked by King Tools
Trend
TREND 8/21X1/4TC B/GUIDED SUNK BEAD 6MM RAD
TREND 8/21X1/4TC B/GUIDED SUNK BEAD 6MM RAD

Cutters with guide bearing reduce setting up time for curved workpieces. Dimensions: D=24.7 mm B=12.7 mm R=6 mm OL=63 mm Shank Diameter=1/4 inch Sha... More Info

 £122.19
INC VAT
TREND 8/51X1/4TC DOUBLE GUIDED SUNK BEAD R3.2MM
TREND 8/51X1/4TC DOUBLE GUIDED SUNK BEAD R3.2MM

For creating a concave radius or cove in the edge of furniture and columns. Dimensions: D=3/4 inch D=19.1 mm C=6.4 mm B=12.7 mm OL=61.0 mm R=3.2 mm S... More Info

 £102.35
INC VAT
TREND 8/53X1/4TC DOUBLE GUIDED SUNK BEAD R5.0MM
TREND 8/53X1/4TC DOUBLE GUIDED SUNK BEAD R5.0MM

For creating a concave radius or cove in the edge of furniture and columns. Dimensions: D=57/64 inch D=22.7 mm C=25/64 inch C=10 mm B=12.7 mm OL=61 m... More Info

 £108.51
INC VAT
Trend 8127 Collet Sleeve 8mm to 12.7mm
Trend 8127 Collet Sleeve 8mm to 12.7mm

Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct s... More Info

 £20.24
INC VAT
TREND 84/49X1/2TC SUNK BEAD 13MM RAD X 25MM DIA
TREND 84/49X1/2TC SUNK BEAD 13MM RAD X 25MM DIA

This quarter radius can produce a sunk bead or a nosing mould. Requires a side fence for guidance. Dimensions: D=25 mm C=20 mm R=13 mm OL=60 mm Shan... More Info

 £135.76
INC VAT
TREND 84/83X1/2TC DRAWER PULL RAD 12.5MM RAD
TREND 84/83X1/2TC DRAWER PULL RAD 12.5MM RAD

The long cut depth of these cutters allows them to produce under-cut finger grooves. Dimensions: D=25 mm C=32 mm R=12.5 mm OL=72 mm Shank Diameter=1/... More Info

 £131.71
INC VAT
TREND 84/92X1/2TC DRAWER PULL 3.5MM R1 X 6.3MM R2
TREND 84/92X1/2TC DRAWER PULL 3.5MM R1 X 6.3MM R2

An initial cut with a straight cutter is required to produce the drawer pull profile. Dimensions: D=44.8 mm D2=24 mm C=25.4 mm R=8 mm R2=2 mm OL=65.4... More Info

 £188.21
INC VAT
TREND 84/93X1/2TC DRAWER PULL 2MM R1 X 4MM R2
TREND 84/93X1/2TC DRAWER PULL 2MM R1 X 4MM R2

An initial cut with a straight cutter is required to produce the drawer pull profile. Dimensions: D=45 mm D2=24 mm C=17 mm R=4 mm R2=2 mm OL=61.4 mm ... More Info

 £207.06
INC VAT
TREND 84/94X1/4TC DRAWER PULL 4MM RAD X 19MM DIA
TREND 84/94X1/4TC DRAWER PULL 4MM RAD X 19MM DIA

An initial cut with a straight cutter is required to produce the drawer pull profile. Dimensions: D=19 mm C=13 mm R=4 mm OL=48 mm Shank Diameter=1/4 ... More Info

 £150.56
INC VAT
TREND 84/95X1/2TC DRAWER PULL 6MM RAD X 38MM DIA
TREND 84/95X1/2TC DRAWER PULL 6MM RAD X 38MM DIA

An initial cut with a straight cutter is required to produce the drawer pull profile. Dimensions: D=38 mm D2=22 mm C=17 mm R=6 mm OL=61 mm Shank Diam... More Info

 £169.38
INC VAT
TREND 865X1/4TC FINGER JOINTER 24.6MM DIA X 18.5MM
TREND 865X1/4TC FINGER JOINTER 24.6MM DIA X 18.5MM

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. Dimensions: D=24.6 mm C=18.5 mm OL=69.3 mm B=12.7 mm... More Info

 £117.20
INC VAT
TREND 866X1/2TC FINGER JOINTER SET 1/2
TREND 866X1/2TC FINGER JOINTER SET 1/2

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefo... More Info

 £188.21
INC VAT
TREND 9/10X1/4TC STAFF BEAD/NOSING 3MM RAD
TREND 9/10X1/4TC STAFF BEAD/NOSING 3MM RAD

Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging. Dimensions: D=19 mm ... More Info

 £118.39
INC VAT
TREND 9/11X1/4TC STAFF BEAD/NOSING 5MM RAD
TREND 9/11X1/4TC STAFF BEAD/NOSING 5MM RAD

Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/11 has a matching cutter Ref. 8/11 for jointing & hinging. Dimensions: D=24 mm ... More Info

 £122.19
INC VAT
TREND 9/5X1/2TC STAFF BEAD/NOSING 12.7MM RAD
TREND 9/5X1/2TC STAFF BEAD/NOSING 12.7MM RAD

Ideal for producing nosings and attractive edge moulds. Dimensions: D=42.9 mm C=25.4 mm C2=40 mm R=12.7 mm OL=80 mm Shank Diameter=1/2 inch For stati... More Info

 £141.14
INC VAT
TREND 9/72X1/2TC B/GUIDED CORNER BEAD 4.8MM RAD
TREND 9/72X1/2TC B/GUIDED CORNER BEAD 4.8MM RAD

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. ... More Info

 £125.90
INC VAT
TREND 9/73X1/4TC B/GUIDED CORNER BEAD 7MM RAD
TREND 9/73X1/4TC B/GUIDED CORNER BEAD 7MM RAD

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. ... More Info

 £139.51
INC VAT
TREND 9/75X1/2TC B/GUIDED MULTI-REED 2MM RAD
TREND 9/75X1/2TC B/GUIDED MULTI-REED 2MM RAD

Ideal for shelves. Edge moulding applications only. Dimensions: D=20 mm C=20 mm B=16 mm R=2 mm OL=70.65 mm Shank Diameter=1/2 inch Shank Diameter: ... More Info

 £135.76
INC VAT
TREND 9/75X1/4TC B/GUIDED MULTI-REED 2MM RAD
TREND 9/75X1/4TC B/GUIDED MULTI-REED 2MM RAD

Ideal for shelves. Edge moulding applications only. Dimensions: D=20 mm C=20 mm B=16 mm R=2 mm OL=70.65 mm Shank Diameter=1/4 inch Shank Diameter: ... More Info

 £135.76
INC VAT
TREND 9/7X1/2TC HAND HOLE/STAFF BEAD 15MM RAD
TREND 9/7X1/2TC HAND HOLE/STAFF BEAD 15MM RAD

With plunge cut these cutters can be used to cut and mould hand holes in stool seats. Dimensions: D=32 mm C=25 mm C2=45 mm R=15 mm OL=86.2 mm Shan... More Info

 £169.38
INC VAT
TREND 9/80X1/4TC B/GUIDED DUAL BEAD 3MM RAD
TREND 9/80X1/4TC B/GUIDED DUAL BEAD 3MM RAD

Can be used to make single, double or corner beads. Dimensions: D1=22 mm C=19 mm B=16 mm R1=3 mm OL=69.65 mm Shank Diameter=1/4 inches Shank Diamete... More Info

 £112.90
INC VAT
TREND 9/85X1/4TC B/GUIDED CORNER BEAD 10MM RAD
TREND 9/85X1/4TC B/GUIDED CORNER BEAD 10MM RAD

This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled. Dimensions: D=22... More Info

 £112.90
INC VAT
TREND 90/12X1/2TC TRADITIONAL TORUS 13.5MM RAD
TREND 90/12X1/2TC TRADITIONAL TORUS 13.5MM RAD

Classic skirting board mould. Dimensions: D=37 mm C=40 mm B=16 mm R=13.5 mm OL=91.56 mm Shank Diameter=1/2 inch For stationary machines at max. reco... More Info

 £150.56
INC VAT
TREND 90/14X1/2TC VICTORIAN TORUS 10MM RAD
TREND 90/14X1/2TC VICTORIAN TORUS 10MM RAD

Classic skirting board mould with a curved return to the edge. Dimensions: D=35 mm C=41 mm B=16 mm R=10 mm OL=92.1 mm Shank Diameter=1/2 inch For sta... More Info

 £150.56
INC VAT
TREND 90/22X1/2TC SIX WING TRIMMER 52.3MM DIA
TREND 90/22X1/2TC SIX WING TRIMMER 52.3MM DIA

Especially designed for routing Corian which is used in many bathrooms and kitchens. For trimming bowls, trepanning and face milling. Can also be use... More Info

 £128.23
INC VAT
TREND 90/26X1/4TC BULL NOSE COMBI 8MM RAD
TREND 90/26X1/4TC BULL NOSE COMBI 8MM RAD

Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. Dimensions: D=27 mm ... More Info

 £117.20
INC VAT

Previous Page
Next Page
[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131]
Last Viewed
Master Lock 8019E Hardened Steel Chain 1m x 10mm
Sealey Adjustable Wrench 600mm
Hills Supadry Hoist Rotary Dryer 4-Arm 60m
Hills Portadry Rotary Dryer 3-Arm 35m










Draper
Mirka
Totectors
Trend
CT1
Terms & Conditions
Powered By TABS For Tools
We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Detla.

© 2026 King Tools
Thursday 30th July 2026