King Tools

01933 410900

In Store Opening Hours

sales@kingtools.co.uk

Monday to Friday: 8:00am - 5:30pm

   

Saturday: 8:45am - 12:00pm
Items: 0
Total: £0.00
Min. Carriage: £0.00
Basket Total: £0.00
Shop By Brand
 
 
 
 
 
 
 .
Breakers, drills , saws & more

 

 

 
 
147 items are stocked by King Tools
Trend
TREND TSQ T SQUARE T/SQ
TREND TSQ T SQUARE T/SQ

Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc. Blade guiding edge bevelled for ease of use. Tap... More Info

 £48.01
INC VAT
Trend UNI/CS Countersink
Trend UNI/CS Countersink

Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep gr... More Info

 £39.95
INC VAT
TREND UNI/CS UNIVERSAL COUNTERSINK
TREND UNI/CS UNIVERSAL COUNTERSINK

This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards By reversing the counter... More Info

 £37.30
INC VAT
TREND UNI/GB16 UNIBASE GUIDE BUSH 16MM OD
TREND UNI/GB16 UNIBASE GUIDE BUSH 16MM OD

Replacement 16mm plastic line-up guide bush for the UNIBASE. Dimensions: Outside diameter=16 mm Plate diameter=60 mm Csk screw hole centres=50 mm Di... More Info

 £7.49
INC VAT
TREND UNI/PIN/1 UNIBASE LINE UP PIN 1/4/1/2
TREND UNI/PIN/1 UNIBASE LINE UP PIN 1/4/1/2

Replacement line-up pin for the UNIBASE.... More Info

 £3.85
INC VAT
TREND UNI/PIN/2 UNIBASE LINE UP PIN 8MM/12MM
TREND UNI/PIN/2 UNIBASE LINE UP PIN 8MM/12MM

Replacement line-up pin for the UNIBASE.... More Info

 £3.85
INC VAT
TREND UNIBASE/150 UNIVERSAL 150MM SUBBASE C/W PINS & BUSH
TREND UNIBASE/150 UNIVERSAL 150MM SUBBASE C/W PINS & BUSH

Unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes. 150mm Diameter with 13 Hole Patter... More Info

 £35.15
INC VAT
TREND UNIBASE/180 UNIVERSAL 180MM SUBBASE C/W PINS & BUSH
TREND UNIBASE/180 UNIVERSAL 180MM SUBBASE C/W PINS & BUSH

180mm Diameter with 23 Hole Patterns to suit most ÚÓ plunge routers (see www.trend-uk.com for compatibility). Precision Centring System ensures perfec... More Info

 £38.17
INC VAT
Trend UNIBASE/180 Universal Plunge Router Sub-Base 180mm
Trend UNIBASE/180 Universal Plunge Router Sub-Base 180mm

The Trend Universal Plunge Router Sub-Base unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide... More Info

 £40.89
INC VAT
TREND UNIBASE/TRIM UNIVERSAL GB ADAPTOR FOR TRIM MODELS
TREND UNIBASE/TRIM UNIVERSAL GB ADAPTOR FOR TRIM MODELS

Unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes 150mm Diameter with 9 Hole Patterns... More Info

 £35.15
INC VAT
TREND VARIJIG VARIJIG SYSTEM ADJUSTABLE FRAME 700
TREND VARIJIG VARIJIG SYSTEM ADJUSTABLE FRAME 700

Adjustable frame and guide for use with a router. Adjustable frame for rectangles and squares. Allows a router to cut recesses, slots, face panel mou... More Info

 £120.10
INC VAT
TREND VJS/AG/36 VARIJIG VARIABLE ANGLE GUIDE 36
TREND VJS/AG/36 VARIJIG VARIABLE ANGLE GUIDE 36

Variable angle guide for the router or saw. Adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. Adjustable ... More Info

 £110.38
INC VAT
TREND VJS/CG/24 VARIJIG CLAMP GUIDE 24 INCH
TREND VJS/CG/24 VARIJIG CLAMP GUIDE 24 INCH

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal... More Info

 £48.65
INC VAT
TREND VJS/CG/36 VARIJIG CLAMP GUIDE 36 INCH
TREND VJS/CG/36 VARIJIG CLAMP GUIDE 36 INCH

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal... More Info

 £56.75
INC VAT
TREND VJS/CG/50 VARIJIG CLAMP GUIDE 50 INCH
TREND VJS/CG/50 VARIJIG CLAMP GUIDE 50 INCH

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal... More Info

 £64.90
INC VAT
TREND VJS/CG/BBC VJS/CG BACK TO BACK CLIPS (8PCS)
TREND VJS/CG/BBC VJS/CG BACK TO BACK CLIPS (8PCS)

Varijig clamp guide back to back clips. Clips comprise of alloy brackets and knobs. Allows two Varijig clamp guides to be joined back to back. Clamp o... More Info

 £18.87
INC VAT
TREND VJS/CG/ESB VJS/CG END STOP BLOCK
TREND VJS/CG/ESB VJS/CG END STOP BLOCK

Varijig clamp guide adjustable end stop block. Engages in the T slot on the clamp guide extrusion and can be locked in position using locking knob. Ca... More Info

 £16.92
INC VAT
TREND VJS/CG/EXT VJS/CG HANDLE LEVER EXTENSION
TREND VJS/CG/EXT VJS/CG HANDLE LEVER EXTENSION

Lever extension handle for Varijig clamp guides. Gives better leverage to operate the clamp, especially when more clamping pressure is required. Slid... More Info

 £10.35
INC VAT
TREND VJS/CG/FB VJS/CG FEATHER BOARD
TREND VJS/CG/FB VJS/CG FEATHER BOARD

Feather board finger pressure accessory for Varijig clamp guides. Clamps to the Varijig clamp guide which can then be clamped to a router table top. P... More Info

 £17.86
INC VAT
TREND VJS/CG/PRO8 VARIJIG CLAMP GUIDE PRO 8 FOOT
TREND VJS/CG/PRO8 VARIJIG CLAMP GUIDE PRO 8 FOOT

Extra long clamp guide for accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping ... More Info

 £223.98
INC VAT
TREND VJS/CG/RBP VJS/CG ROUTER BASE PLATE
TREND VJS/CG/RBP VJS/CG ROUTER BASE PLATE

Plunge router base base accessory for the Varijig clamp guides. Base plate engages in the T-slot in the extrusion. Made from clear plastic. Includes ... More Info

 £35.77
INC VAT
TREND VJS/CG/SBP VJS/CG SAW BASE PLATE
TREND VJS/CG/SBP VJS/CG SAW BASE PLATE

Circular saw base base accessory for the Varijig clamp guides. Base plate engages in the T-slot in the extrusion. Made from plastic. Includes adjustab... More Info

 £35.77
INC VAT
TREND VJS/CG/SQA VJS/CG SQUARING ATTACHMENT
TREND VJS/CG/SQA VJS/CG SQUARING ATTACHMENT

Allows Varijig clamp guide to be squared up more accurately. Large 90 degree head allows the Varijig clamp guide to be used as a clamping T- square... More Info

 £17.86
INC VAT
TREND VJS/CG/WJK VJS/CG WIDE JAW KIT
TREND VJS/CG/WJK VJS/CG WIDE JAW KIT

Pair of plastic jaws that are screwed onto the jaws of the Varijig clamp guides. Distributes clamping pressure over the workpiece to minimise clamping... More Info

 £12.23
INC VAT
TREND VJS/CK VARIJIG SYSTEM CLAMP KIT (PAIR)
TREND VJS/CK VARIJIG SYSTEM CLAMP KIT (PAIR)

Pair of sliding friction clamps with 32mm clamping thickness. The clamp can be used with the Varijig system including the varijig set, straight guides... More Info

 £43.93
INC VAT
TREND VJS/CK/L VARIJIG SYSTEM EX LONG CLAMP (PAIR)
TREND VJS/CK/L VARIJIG SYSTEM EX LONG CLAMP (PAIR)

Pair of sliding friction clamps with 51mm (2 inch) clamping thickness. To be used with the Trend Varijig Adjustable Frame System. Dimensions: Clamp t... More Info

 £66.44
INC VAT

Previous Page
Next Page
[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131][132][133][134][135][136][137][138][139]
Last Viewed
Frys Metals Powerflow Flux Large 350g
Knipex 4-in-1 Electrician's Pliers Multi-Component Grip 160mm (6.1/4in)
IRWIN® Marples® M373 Bevel Edge Chisel Splitproof Handle Set, 4 Piece
Markal DURA-INK® 20 Retractable Marker - Black (Tub 24)
Markal TRADES-MARKER® DRY Graphite Refills (Pack 6)










Trend
Grabo
Siegen
CT1
Faithfull
Terms & Conditions
Powered By TABS For Tools
We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Detla.

© 2025 King Tools
Monday 15th September 2025