Trend at King Tools

Trend

TREND AIR STEALTH LITE PRO FFP3 MASK M/L

Lightweight multi-shift disposable FFP3 R D rated face mask. Full 8 hours of use per filter for all day protection 99%+ filtration efficiency Capture... More Info

£8.22

INC VAT

Trend 1/2in Router Cutter Set, 6 Piece

This Trend 1/2in Router Cutter Set has a range of Tungsten Carbide Tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboa... More Info

£39.97

INC VAT

Trend 1/4in TCT Router Bit Starter Set, 50 Piece

The Trend 50 Piece Router Bit Starter Set contains a range of popular 1/4in tungsten carbide tipped cutters for a variety of applications. Suitable fo... More Info

£225.79

INC VAT

Trend 1/4in TCT Router Cutter Set, 6 Piece

This Trend 1/4in Router Cutter Set has a range of tungsten carbide tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboa... More Info

£39.97

INC VAT

TREND 10/10X1/2TC CHAMFER V GROOVE A=45 X 32MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Dimensions: D=32 mm C=15 mm C2=... More Info

£83.36

INC VAT

Trend 10/11 x 1/2 TCT V-Groove Chamfer 45° 19.0 x 38mm

These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools a... More Info

£73.20

INC VAT

TREND 10/11X1/2TC CHAMFER V GROOVE A=45 X 38MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Dimensions: D=40 mm C=19 mm C2=... More Info

£79.30

INC VAT

TREND 10/12X1/2TC CHAMFER V GROOVE A=45I X 51MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Dimensions: D=51 mm C=25 mm C2=... More Info

£139.51

INC VAT

TREND 10/1X1/2TC MORTAR GROOVE/LARGE CHAM A=45

Use for producing mortar grooves and for bevelling applications. Dimensions: D=41 mm C=22.5 mm C2=23 mm A=45 degrees OL=62.5 mm Bottom flat diameter ... More Info

£84.29

INC VAT

TREND 10/22X1/2TC BEVEL 24MM DIA X 25MM CUT

Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Dimension... More Info

£87.44

INC VAT

TREND 10/25X1/2TC TAPERED 12.7MM DIA X 32MM CUT

Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release... More Info

£69.10

INC VAT

TREND 10/2X1/2TC MORTAR GROOVE/LARGE CHAM A=60

Use for producing mortar grooves and for bevelling applications. Dimensions: D=38 mm C=27 mm C2=25.5 mm A=60 degrees OL=62.5 mm Shank Diameter=1/2 in... More Info

£91.49

INC VAT

TREND 10/30X1/2TC DRAWER LOCK 25.4MM DIA X 12.7MM CUT

To increase gluing area producing a strong joint in drawer production. Dimensions: D=25.4 mm C=12.7 mm OL=49 mm Shank Diameter=1/2 inch Timber thickn... More Info

£59.98

INC VAT

TREND 10/40X1/2TC BUTTERFLY SPLINE CUTTER 104 DEG

To rout butterfly key and splines in timbers and man-made boards. Use in conjunction with 104 deg (14 deg) dovetail cutter ref. L120 which cuts doveta... More Info

£100.63

INC VAT

TREND 10/50X1/2TC BIRDSMOUTH CUTTER 6&12 SIDED 30/60 DEG

To make round boxes, planters, barrels or other multi-sided components. One side of the component is machined with the cutter. Fast and accurate join... More Info

£92.99

INC VAT

TREND 10/51X1/2TC BIRDSMOUTH CUTTER 8 SIDED 45 DEG

To make round boxes, planters, barrels or other multi-sided components. One side of the component is machined with the cutter. Fast and accurate join... More Info

£85.23

INC VAT

TREND 1004/20TC LIP & SPUR TWO WING BIT 20MM DIA

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics o... More Info

£66.90

INC VAT

TREND 1004/25TC LIP & SPUR TWO WING BIT 25MM DIA

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics o... More Info

£67.94

INC VAT

TREND 1004/40TC LIP & SPUR TWO WING BIT 40MM DIA

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics o... More Info

£83.13

INC VAT

TREND 104/35X1/4TC HINGE SINKING 35MM DIA

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered ... More Info

£78.72

INC VAT

TREND 104/35X3/8TC HINGE SINKING 35MM DIA

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered ... More Info

£76.69

INC VAT

TREND 105/35X1/2TC ROUTER MACHINE BIT 35MM DIA HINGE

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accu... More Info

£95.56

INC VAT

TREND 105/35X8MMTC ROUTER MACHINE BIT 35MM DIA HINGE

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accu... More Info

£88.44

INC VAT

TREND 105/40X1/2TC ROUTER MACHINE BIT 40MM DIA HINGE

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accu... More Info

£100.63

INC VAT

Trend 10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm

These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics.Tools are offered to produce vari... More Info

£61.07

INC VAT

TREND 10H/1X1/4TC PIN GUIDED CHAM/BEVEL A=45 253348

Ideal for fast chamfering. Popular in the sign making trades. For chamfering edges of plastic material. Dimensions: C=10 mm C2=14 mm P=5.5 mm A=4... More Info

£66.16

INC VAT

[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143][144][145][146]