Product Code: GDM200F/VS Variable speed model allows stepless control of drilling speed between minimum and maximum enabling finer control of finish and tolerance. The belt transmission uses two spring tensioned cone pulleys, the diameters of which can be adjusted by moving a centre idle pulley with the speed adjustment control lever. Meets Safety of Machinery (Safety) Regulations 1992 (and amendments). Safety devices fitted include a no-volt release switch, allowing insurance company approval for use in educational establishments. Supplied with chuck guard.
16mm (5/8") Capacity chuck No. 2MT.
Fitted with no-load voltage switch and locking cover to prevent accidental starting.
Height: 1630mm.
Spindle Centre to Column: 178mm.
Motor Power: 450W, Input Power: 650W.
Column Diameter: 80mm.
Spindle Travel: 80mm.
Weight: 81kg.
Model No. GDM200F/VS
Variable speed model allows stepless control of drilling speed between minimum and maximum enabling finer control of finish and tolerance.
The belt transmission uses two spring tensioned cone pulleys, the diameter of which can be adjusted by moving a centre idle pulley with the speed adjustment control lever.
Meets Safety of Machinery (Safety) Regulations 1992 (and amendments).
Safety devices fitted include a no-volt release switch, allowing insurance company approval for use in educational establishments.
;)
;)
;)
;)
;)
