Product Code: PH/JIG/AK All-metal Pocket Hole Jig for drilling 9.5mm pocket holes in a range of material thicknesses. Twin 30mm centred pocket holes are ideal for large builds such as wardrobes, bookcases and cabinets. Can be bench-mounted for batch work or guides can be used independently for in-situ internal & external applications.
Full Length Hardened Drill Guide Bushes for long life and accurate drilling.
Material Thickness Gauge allows fast checking of material thickness without the use of a tape measure.
Drill Bit Setting Turret for setting the correct drill depth to the material thickness.
Work Support Rods prevent twisting when drilling longer material.
Removable Drilling guides allows the column to be used separately for repair applications.
Guide Locking Knobs lock the drilling guide in place once height has been adjusted.
Dust Collection Port efficiently clears dust and debris for faster, cleaner drilling.
On-Board Adjustable Clamp with quick-release mechanism.
Non-Marring Clamp Pad to prevent pressure marks on the workpiece.
T-Slot Clamp Guide supports the use of rail clamps to securely hold the jig to a work surface.
Countersink Screw positions allows the jig to be screwed to a base board for extra support.
Custom Carry Bag designed to optimise storage space.
Dimensions:
Material thickness min.=12.7 mm
Material thickness max.=38 mm
Material width min.=38 mm
Hole pitch=30 mm
Drill diameter=9.5 mm
Square drive bit size=No.2
Dust spout ID=30 mm
Underside T slot=12.2/8.4mm x 6mm
Drilling angle=15 degrees
Screw size=Fine No.7 x 30 mm
Screw sizes=Coarse No.7 x 25 mm, No.7/8 x 30 mm, No.8 x 38 mm, No.8 x 50 mm, No.8 x 63 mm
;)
