Product Code: LOCK/JIG/A Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately.
Suitable for DDA (Disabilty Discrimination Act) lock size.
20mm x 235mm radius end face plate, 24mm x 235mm radius end face plate and 17mm x 170mm mortise.
Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG).
Suitable for doors 34mm to 58mm thick.
An auger bit and drill is required to complete deep mortises.
The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
Suits DIN style locks.
Dimensions:
Door thickness min.=34 mm
Door thickness max.=58 mm
Lock faceplate sizes
Metric (D x OL)=Template
20 x 235mm (RE**)=1
24 x 235mm (RE**)=2
Lock mortise size
17 x 170mm*=A
*Mortise is actually 180mm to give 5mm clearance each end.
**Rounded ends
;)
