Product Code: 46/521X1/4TC Two fluted for clean finish, nose bearing to rout a rebate, and shank bearing to profile edge flush.
Ideal to remove damaged trim on tops to allow new trim to be added.
Tungsten carbide tipped for abrasive materials and is ideal for use on timber and manmade board.
Self guided with bearing on nose and shank.
Diameter of tool 16mm with 14mm diameter bearing nose.
Suitable for material 12mm thick to maximum 38mm thick.
Standard trim is 1mm with 14mm bearing.
Accessory bearings for 1.5mm, 2.5mm and 3mm lipping/edging available.
Dimensions:
D=16 mm
C=25 mm
OL=82 mm
B=14 mm
Rebate E=1 mm
Shank Diameter=1/4 inch
;)
